John-deere stx38 User Manual download pdf (Page 67)

4/23/97

3 - 35

ENGINE

REPAIR

INSPECT VALVE GUIDES

1. Clean inside of valve guide. Standard valve guide

reamer (D20020WI) can be used.

2. Measure inside diameter of guide with gauge (A).

3. Measure outside diameter of valve stem (B).

4. An oversize valve is available. Replace valve if

stem-to-guide clearance is too great.

IMPORTANT: If guide is reamed oversized, an

oversize valve must be installed.

5. Use oversize reaming tool (JDG705) to ream guide,

if necessary.

6. Replace cylinder head if inside diameter of guide is

greater than oversize specification.

Specifications:

Valve Guide Ream (standard)

. . . . . . . . . . . . . . . . . . . . . . . . . 7.048 mm (0.2775 in.)

Valve Guide Ream (oversize)

. . . . . . . . . . . . . . . . . . . . . . . . . 7.298 mm (0.2873 in.)

Intake Stem-to-Guide Clearance

. . . . . . . . . . . . . 0.38—0.076 mm (0.0015—0.0030 in.)

Intake Guide (Maximum Wear)

. . . . . . . . . . . . . . . . . . . . . . . . . 7.134 mm (0.2809 in.)

Exhaust Stem-to-Guide Clearance

. . . . . . . . . . . . . 0.050—0.088 mm (0.002—0.0035 in.)

Exhaust Guide (Maximum Wear)

. . . . . . . . . . . . . . . . . . . . . . . . . 7.159 mm (0.2819 in.)

RECONDITION VALVE SEATS

1. Inspect valve seats.

2. Replace cylinder head if seats are warped or

distorted beyond reconditioning.

3. Reface pitted or worn seats as shown in drawing.

4. Lap valves after refacing

5. Check seat for good contact using Prussian Blue

Compound.

M52081

M52082

Exhaust Valve

Exhaust Insert

Intake Valve

Intake Insert

89°

6.5

35.63/

45°

1.5

6.982/7.000

89°

45°

7.033/

1.5

37.987/

38.013

34.013/

33.987

7.058

7.033/

7.058

M55939

31.63/

31.37

35.37

6.970/6.988

1 2 ... 62 63 64 65 66 67 68 69 70 71 72 ... 313 314

Comments to this Manuals

No comments

John-deere stx38 User Manual Page 67

Comments to this Manuals

Related products and manuals for Special machinery John-deere stx38