John Deere TY25864 User Manual download pdf (Page 21)

Controls and Operation

OUOD006,0000018 –19–16JUN04–4/4

NOTE: When the display indicates 77% charged, the

battery is charged well enough to start most

vehicles.

NOTE: When charging is completed, the CHARGE

(green) LED illuminates and the battery charger

switches to the Maintain Mode, or Float Mode, of

operation. In this mode, the battery charger

delivers a small current when necessary to keep

the battery fully charged.

If charging can’t be completed normally, the

charger’s output is shut off and the red CHECK

LED and the digital display blink on and off. In this

aborted state, the charger ignores all buttons. To

reset, after aborted charge, either disconnect the

battery or unplug the charger.

10. To disconnect the battery charger after charging, first

unplug the power cord. Then remove the clamp from

the chassis or engine block, and finally, disconnect

the clamp from the battery post.

11. Clean and store the battery charger in a dry location.

10-10

091604

PN=21

1 ... 20 21 22 ... 84

No comments

John Deere TY25864 User Manual Page 21