John-deere AC-2500E User Manual download pdf (Page 20)

Operating the Washer

20 Operator’s Manual

CLEANING HORIZONTAL SURFACES

Move nozzle wand from side to side. Direct spray at an

angle to force debris ahead and away from the cleared

area.

Depending on the material to be removed and nozzle

pressure, hold nozzle end 8 to 10 inches (20 to 25 cm) from

the surface and use slow, overlapping strokes. If debris

is easy to remove, move nozzle back to cover more area

for faster cleaning.

CLEANING VERTICAL SURFACES

IMPORTANT: Remember that the washer can deliver

a high pressure spray that can break

glass and gouge soft wood and other

materials.

When cleaning building interiors or exteriors without

detergents, work from top to bottom. This will help

eliminate streaks. In interiors, start with the ceiling rst,

then the walls and the oor last.

Clean around windows carefully. If glass panes are not

well-caulked and puttied, the high pressure spray could

break the glass.

Never spray directly overhead. Always spray ahead to

avoid dripping or falling debris.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 63 64

No comments

John-deere AC-2500E User Manual Page 20