John Deere AUTOTRAC OMPFP11320 User Manual download pdf (Page 27)

GS2 Display 1800

CF86321,000038D -19-01JUN11-1/1

CF86321,000038E -19-01JUN11-1/1

CF86321,000038F -19-01JUN11-1/1

Automatic Guidance System Detected

Each time a machine equipped with AutoTrac is started,

this screen will appear as a reminder of operator

responsibilities when using AutoTrac steering system.

PC13157 —19—17FEB11

Automatic Guidance

Enabling System

Press STEER ON/OFF button to toggle between

enable/disable AutoTrac.

To enable system, all of the following criteria must be met:

•

AutoTrac activation is detected.

•

Track 0 has been setup.

•

Tracking mode selected.

•

Proper operator presence mode selected.

•

TCM must be installed and turned on.

•

AutoTrac Controller Steering Kit is plugged in.

Activating System

CAUTION: While AutoTrac is activated, operator

is responsible for steering at end of path

and collision avoidance.

Do not attempt to turn on (Activate) AutoTrac

system while transporting on a roadway.

After system has been ENABLED, operator must manually

change system to ACTIVATED status when steering

assistance is desired.

Press resume switch. This will initiate assisted steering.

In order to activate system following criteria must be met:

•

Vehicle speed is greater than 0.5 km/h (0.3 mph).

•

Forward vehicle speed is less than 30 km/h (18.6 mph)

•

Reverse vehicle speed is less than 10 km/h (6.0 mph).

•

Vehicle within 45 degrees of desired track.

•

Operator is seated.

•

TCM is on.

•

In reverse AutoTrac will remain activated for 45

seconds. After 45 seconds the machine must be put in

a forward gear before reverse will activate again.

30-1

090811

PN=27

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 71 72

Comments to this Manuals

No comments

John Deere AUTOTRAC OMPFP11320 User Manual Page 27

Comments to this Manuals

Related products and manuals for Cars John Deere AUTOTRAC OMPFP11320