John-deere la105 User Manual download pdf (Page 25)

Service Lubrication - 24

SERVICE LUBRICATION

• Lubricate front axle pivot.

• Lubricate front axle wheel spindles and bushings.

Every 25 Hours

• Lubricate mower spindles.

• Lubricate mower pivot points.

• Lubricate front axle pivot.

• Lubricate front axle wheel spindles and bushings.

Every 50 Hours

• Change engine oil and replace filter. (Service more frequently under

dusty conditions.)

• Clean/replace air filter precleaner. (Service more frequently under dusty

conditions.)

• Replace air filter element. (Service more frequently under dusty

conditions.)

• Clean/replace emission filter (if equipped).

• Clean engine cooling fins.

• Replace fuel filter.

• Replace spark plug(s).

• Clean battery terminals.

• Sharpen/replace mower blades.

• Check/replace mower drive belt.

• Clean mower deck.

• Check/level mower deck.

• On 107 cm (42 in.) deck: Check/adjust mower deck belt tension.

• On 107 cm (42 in.) deck: Check/adjust mower deck spindle brakes.

Every 200 Hours

• Check/adjust valve clearance. See your John Deere dealer for this

service.

Service Lubrication

Grease

The following greases are preferred:

• John Deere Multi-Purpose SD Polyurea Grease

• John Deere Multi-Purpose HD Lithium Complex Grease

If not using any of the preferred greases, be sure to use a general all-

purpose grease with an NLGI grade No.2 rating.

Wet or high speed conditions may require use of a special-use grease.

Contact your Servicing dealer for information.

Lubricating Front Axle

MX16565

Wheel Spindles and Bushings

• Lubricate front wheel spindle grease fitting (A) and wheel hub grease

fitting (B), one on each side, with one or two shots of general all-purpose

grease.

Front Axle Pivot

• Lubricate front axle center pivot grease fitting (C) with one or two shots of

general all-purpose grease.

Lubricating Pivot Points

107 cm (42 in.) Mower Deck:

MX25899

A- Blade Brake Pivots

B- Deck Idler Pivot

C- Spindle Grease Fitting (2)

• Lubricate the blade brake pivots (A) and deck idler pivot (B) with a

general all-purpose spray lubricant.

• Lubricate the two spindle grease fittings (C) with one or two shots of

general all-purpose grease.

IMPORTANT: Avoid damage! Use recommended John Deere

greases to avoid component failure and premature wear.

The recommended John Deere greases are effective within an

average air temperature range of -29 to 135 degrees C (-20 to 275

degrees F).

If operating outside that temperature range, contact your

Servicing dealer for a special-use grease.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 51 52

Comments to this Manuals

No comments

John-deere la105 User Manual Page 25

Comments to this Manuals

Related products and manuals for Gardening equipment John-deere la105