John-deere OMGX10902 I0 User Manual download pdf (Page 11)

Operating - 7

OPERATING

Operatin g

Before Operating Blade

1. Learn all controls and how they work. Read your

machine's operator manual, if necessary.

2. Lock park brake.

3. Stop engine.

4. Remove key.

5. Make operating adjustments as necessary.

6. Tighten loose hardware.

Rotating Scraper Blade

1. Park machine safely. (See Parking Safely in the Safety

section.)

2. Raise blade and place wood block under frame channel.

3. Remove six 5/16 carriage bolts and six 5/16 nylock nuts

(A) to remove scraper blade (B).

4. Turn scraper blade over and install scraper blade.

5. Adjust skid shoes.

Adjusting Lift Height

1. Park machine safely. (See Parking Safely in the Safety

section.)

2. Place the mower lift lever one notch up from its lowest

position.

3. Tighten both 3/8 nylock nuts (A) up to the bottom of the

lift channel (B).

Leveling Blade from Side to Side

1. Park machine on a level surface.

2. Place mower lift handle in the TRANSPORT (upper)

position.

Picture Note: Level side to side (A).

3. Measure at each end of blade.

NOTE: Do not adjust nut of lift link up more than two

turns without lowering opposite side lift link.

4. If one side of blade is low, adjust nut (B) on lift link UP

on that side to level blade.

M92908

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 23 24

No comments

John-deere OMGX10902 I0 User Manual Page 11